EN 10253-2 is a European standard that specifies the requirements for butt-welding pipe fittings made of carbon and low-alloy steels. The standard is divided into two parts: Part 1 covers fittings with specified room temperature properties, and Part 2 covers fittings with specified elevated temperature properties.
The main difference between EN 10253-2 A and B lies in the temperature range for which the fittings are intended.
- EN 10253-2 Type A fittings are intended for use at room temperature and below. They are suitable for applications where the operating temperature does not exceed the specified limit for Type A fittings.
- EN 10253-2 Type B fittings are designed for elevated temperature service. They are suitable for use in applications where the operating temperature is higher than what is suitable for Type A fittings.Wilson Pipeline
The specific requirements for material composition, mechanical properties, dimensions, tolerances, testing, and marking are outlined separately for Type A and Type B fittings within the standard to ensure that they meet the respective temperature-related performance requirements.
EN 10253-2 Type A Fittings:
Type A fittings are designed for use at room temperature and below. Here are some key aspects of Type A fittings:
- Material Composition: Type A fittings are typically made of carbon and low-alloy steels suitable for room temperature applications.
- Mechanical Properties: The mechanical properties, such as tensile strength, yield strength, and elongation, are specified based on the material grade and manufacturing process. These properties ensure the fittings can withstand the loads and stresses encountered at room temperature.
- Dimensions and Tolerances: EN 10253-2 defines the dimensional requirements and tolerances for Type A fittings, including outside diameter, wall thickness, and overall dimensions. These specifications ensure compatibility and interchangeability with pipes and other fittings.
- Testing: Type A fittings undergo various tests to ensure their quality and performance. These tests may include hydrostatic testing, non-destructive testing (such as ultrasonic testing), and visual inspection.
- Marking: Type A fittings are marked according to the standard’s requirements to provide information about the manufacturer, material grade, size, and other relevant details.
EN 10253-2 Type B Fittings:
Type B fittings are specifically designed for elevated temperature service. Here are some key aspects of Type B fittings:
- Material Composition: Type B fittings are typically made of carbon and low-alloy steels with enhanced properties suitable for elevated temperature applications. These materials may include alloys that offer improved high-temperature strength and resistance to thermal degradation.
- Mechanical Properties: The mechanical properties of Type B fittings are tailored to ensure adequate strength and ductility at elevated temperatures. This includes properties such as creep resistance, which is essential for withstanding prolonged exposure to high temperatures.
- Dimensions and Tolerances: Similar to Type A fittings, Type B fittings adhere to specific dimensional requirements and tolerances. However, the dimensions may be adjusted to accommodate thermal expansion and contraction at elevated temperatures.
- Testing: Type B fittings undergo rigorous testing to verify their suitability for elevated temperature service. In addition to standard tests, such as hydrostatic testing, special tests may be conducted to assess the fittings’ performance under high-temperature conditions.
- Marking: Type B fittings are marked in accordance with the standard to provide essential information about their suitability for elevated temperature service, material composition, size, and other relevant details.
By distinguishing between Type A and Type B fittings, EN 10253-2 ensures that manufacturers and users can select the appropriate fittings based on the intended temperature conditions of the application, thereby promoting safety, reliability, and performance.
Wilson Pipeline is a leading manufacturer and distributor of flange fittings material from alloy steel stainless steel to carbon steel.products, including Super Duplex Stainless Steel Flanges, Stainless Steel Flanges, Stainless Steel Pipe Fittings. ASME B16.5 ASME B16.9 ASME B16.11 EN1092,ANSI ASTM,GOST,JIS,DINWilson Pipeline products are widely used in Shipbuilding, Nuclear power, Marine engineering, Petroleum, Chemical, Mining, Sewage treatment, Natural gas and Pressure vessels and other industries.If you want to have more information you want to share your enquiry with us, contact us at sales@wilsonpipeline.com
English 
